Build from source


English | українська

Return to previous index

WARNING: Flash from bin/, NOT elf/

WARNING: When you build a ROM image from the Libreboot build system, please ensure that you flash the appropriate ROM image from bin/, NOT elf/. The elf/ coreboot ROMs do not contain payloads. Libreboot’s build system builds no-payload ROMs under elf/, and payloads separately under elf/. Then it copies from elf/ and inserts payloads from elf/, and puts the final ROM images (containing payloads) in bin/. This design is more efficient, and permits many configurations without needless duplication of work. More info is available in the lbmk maintenance manual

Introduction

libreboot’s build system is named lbmk, short for LibreBoot MaKe, and this document describes how to use it. With this guide, you can know how to compile libreboot from the available source code.

The following document describes how lbmk works, and how you can make changes to it: libreboot maintenance manual

Sources

This version, if hosted live on libreboot.org, assumes that you are using the lbmk git repository, which you can download using the instructions on the code review page.

A note about documentation (and this page)

From Libreboot 20231021 onwards, all releases (including 20231021) have lbwww.git (the website) and lbwww-img.git (images for the website) archived in the src tar archive for that release; older releases were hit or miss, from 20210522 to 20230625, as to whether they came with documentation; releases older than 20210522 generally always came with documentation. Modern Libreboot documentation is written in Markdown (pandoc variant)

If you’re working with release documentation, you don’t get the full HTML files (such as the one you’re viewing now, if you’re reading this page in a web browser), so either read the Markdown files directly, or compile them to HTML using the Untitled Static Site Generator (which is what the Libreboot project uses to generate HTML from those files).

NOTE: av.libreboot.org is hardcoded as the domain name where images are pointed to, in lbwww.git, so you will need to replace these references in your local version, unless you’re happy to just continue using those.

Libreboot’s build system uses Git, extensively. You should perform the steps below, even if you’re using a release archive.

Before you use the build system, please know: the build system itself uses Git extensively, when downloading software like coreboot and patching it.

You should make sure to initialize your Git properly, before you begin or else the build system will not work properly. Do this:

git config --global user.name "John Doe"
git config --global user.email johndoe@example.com

Change the name and email address to whatever you want, when doing this.

You may also want to follow more of the steps here: https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup

Python

You should ensure that the python command runs python 3, on your system. Python2 is unused by lbmk or anything that it pulls down as modules.

If building on Debian/Ubuntu based systems, you can achieve that via:

sudo apt install python-is-python3

On Fedora, you can use the following

sudo dnf install python-unversioned-command

How to compile Libreboot

Actual development/testing is always done using lbmk directly, and this includes when building from source. Here are some instructions to get you started:

Zero..st, check time/date

Make sure date/hwclock report the correct time and date on your system, because parts of the build process download from HTTPS servers and wrong time or date can cause connections to be dropped during negotiation.

First, install build dependencies

Libreboot includes a script that automatically installs build dependencies according to the selected linux distro. The currently supported distros are: Debian/Ubuntu/Linux Mint/Pop!_OS, Fedora, Arch Linux/Parabola or Void Linux.

Some examples (run them as root, use use e.g. sudo, doas):

./build dependencies ubuntu

or

./build dependencies debian

or

./build dependencies fedora38

or

./build dependencies arch

NOTE: In case of Ubuntu 20.04 LTS or derived distros for that specific release, use the dedicated configuration file:

./build dependencies ubuntu2004

Check: config/dependencies/ for list of supported distros.

Technically, any Linux distribution can be used to build libreboot. However, you will have to write your own script for installing build dependencies.

Next, build ROM images

Libreboot MaKe (lbmk) automatically runs all necessary commands; for example, ./build roms will automatically run ./build grub if the required GRUB payload (under elf/grub/) does not exist.

As a result, you can now (after installing the correct build dependencies) run just a single command, from a fresh Git clone, to build all ROM images:

./build roms all

or even just build specific ROM images, e.g.:

./build roms x60

or get a list of supported build targets:

./build roms list

Or maybe just build payloads?

If you wish to build payloads, you can also do that. For example:

./build grub

./update trees -b seabios

./update trees -b u-boot

Previous steps will be performed automatically. However, you can still run individual parts of the build system manually, if you choose. This may be beneficial when you’re making changes, and you wish to test a specific part of lbmk.

Want to modify Libreboot?

Check the lbmk maintenance manual for guidance. You may for example want to modify a config, e.g.:

./update trees -m coreboot x200_8mb

Or perhaps add a new board! The maintenance manual will teach you how the Libreboot build system (lbmk) works!

Markdown file for this page: https://libreboot.org/docs/build/index.md

Subscribe to RSS for this site

Site map

This HTML page was generated by the Untitled Static Site Generator.