Any changes to the hardware or software listed here are usually tested (by atleast one user), and reproducible AT YOUR OWN RESPONSIBILITY.
Some physical modifications might be UNREVERSIBLE, only replacable, keep in mind.
In case if you need any help or get another idea to include here, submit a patch on codeberg or get in contact on irc.
!DANGER! Double/triple check if you wired it right, as doing it wrong may DAMAGE your whole device.
Remove the safety black frame carefully in case you would want to install it back.
———– Dell 5 Pin layout ———–
________________________________________
-| Yellow | Red | Black | Blue | N/A |
———-\____________________/
——- Standard Pin Layout ——-
-| Black | Red | Yellow | Blue |
(3 pin fans do not have the blue wire / 4th pin)
There are 2 ways to connect 3/4 pin standard fan to the prop. 5pin header;
Using a fan controller hub is advised if full-speed fan operation is not desired.
Match the pins according to the description above, then insert it, leaving 2 pins free (blue & n/a), in case if you have a 4pin pwm fan, the side starting with the blue left unconnected.
Adapters are cheap and much less of a hassle, you have been warned.
The wires on the connector needs to be moved by 1 (atleast), meaning the blue/4th wire has to be the 1st wire.
It shall look like this from the standard:
——- Standard Pin Layout ——-
-| Blue | Black | Red | Yellow |
Match and inster it, with this only 1 pin (n/a) left alone.
In case any of these motherboards would be used in a different case with a 2 pin power(on) connector, connect it to the 1 (yellow/red) & 2 (Black/black) pins. (Black to black, red to yellow)
For LEDs, 3 (-/black) & 5 (+/red) (the black frame might needs to be pull carefully to reinsert it)
-|– Pin layout – |-
-| 1 | 3 | 5 |-
-| 2 | 4 | N/A |-
A guide might be here soon with pictures.
Reference here
Fit a bigger GPU that exceeds the stock 10-inch length limit by removing the plastic 3.5" drive cage.
Video walktrough. (just found, not my)
A guide might be here soon with pictures.
Markdown file for this page: https://libreboot.org/extras-per-boards/dell_optiplex_&_precision-related.md
This HTML page was generated by the Libreboot Static Site Generator.