Libreboot 20140711 release

Return to index

Article published by: Leah Rowe

Date of publication: 11 July 2014

• Initial release (new coreboot base, dated 1st June 2014. See ‘getcb’ script for reference)
• DEBLOBBED coreboot
• Removed the part from memtest86+ ‘make’ where it tried to connect to some scp server while compiling. (commented out line 24 in the Makefile)
• X60 now uses a single .config (for coreboot)
• X60 now uses a single grub.cfg (for grub memdisk)
• X60 now uses a single grub.elf (payload)
• Added new native graphics code for X60 (replaces the old ‘replay’ code) from Vladimir Serbinenko: 5320/9 from review.coreboot.org
• T60 is now supported, with native graphics. (5345/4 from review.coreboot.org, cherry-picked on top of 5320/9 checkout)
• Added macbook2,1 support (from Mono Moosbart and Vladimir Serbinenko) from review.coreboot.org (see ‘getcb’ script to know how that was done)
  • Documentation: added information linking to correct page and talking about which models are supported.
  • Added resources/libreboot/config/macbook21config
  • macbook21: Added ‘build-macbook21’ script and linked to it in ‘build’ (ROMs included under bin/macbook21/)
  • macbook21: Removed dd instructions from build-macbook21 script (macbook21 does not need bucts when flashing libreboot while Apple EFI firmware is running)
  • Documentation: Added macbook21 ROMs to the list of ROMs in docs/#rom
• Documentation: added a copy of Mono’s Coreboot page (for macbook21) and linked it in main index.
• T60: Copy CD option from the grub.cfg files for T60 *serial*.rom images into the grub configs for non-serial images. (T60 laptops have CD/DVD drive on main laptop)
• macbook21: remove options in build-macbook21 for *serial*.rom (there is no dock or serial port available for macbook21)
• Added patches for backlight controls on X60 and T60 with help from Denis Carikli (see ./resources/libreboot/patch/gitdiff and ./getcb and docs/i945_backlight.html)
  • Documentation: added docs/i945_backlight.html showing how backlight controls were made to work on X60/T60
• Documentation: Added info about getting LCD panel name based on EDID data.
  • Documentation: Added a link to this from the list of supported T60 laptopss and LCD panels for T60 (so that the user can check what LCD panel they have).
• X60/T60: Merged patches for 3D fix (from Paul Menzel) when using kernel 3.12 or higher (see ./resources/libreboot/patch/gitdiff and ./getcb)
  • based on 5927/11 and 5932/5 from review.coreboot.org
• Improved thinkpad_acpi support (from coreboot ): xsensors shows more information.
  • From 4650/29 in review.coreboot.org (merged in coreboot ‘master’ on June 1st 2014)
• Merged changes for digitizer (X60 Tablet) and IR (X60 and T60) based on 5243/17, 5242/17 and 5239/19 from review.coreboot.org
  • (see ./resources/libreboot/patch/gitdiff and ./getcb)
• Documentation: added information about building flashprog using ‘builddeps-flashprog’ script.
• Re-created resources/libreboot/config/x60config
• Re-created resources/libreboot/config/t60config
• Added ‘x60tconfig’ in resources/libreboot/config (because X60 Tablet has different information about serial/model/version in ‘dmidecode’)
  • Added ‘build-x60t’ script
  • Updated ‘build’ script to use ‘build-x60t’
  • Documentation: added to #config section the section #config_x60t (libreboot configuration and dmidecode info)
  • Documentation: added x60t ROMs to the list of ROMs
• Tidied up the ‘builddeps’ script (easier to read)
• Tidied up the ‘cleandeps’ script (easier to read)
• Annotated the ‘buildall’ script
• Added ‘getcb’ script for getting coreboot revision used from git, and patching it.
• Added ‘getgrub’ script for getting the GRUB revision used from git, and patching it.
• Added ‘getmt86’ script for getting the memtest86+ version used, and patching it.
• Added ‘getbucts’ script for getting the bucts version used.
• Added ‘getflashprog’ script for getting the flashprog version used, and patching it
• Added ‘getall’ script which runs all of the other ‘get’ scripts.
• Add instructions to the ‘build’ script to prepare libreboot_meta.tar.gz
  • New archive: libreboot_meta.tar.gz - minimal archive, using the ‘get’ scripts to download all the dependencies (coreboot, memtest, grub and so on).
• Documentation: added information about where ‘build’ script prepares the libreboot_meta.tar.gz archive.
• Documentation: added information about how to use the ‘get’ scripts in libreboot_meta.tar.gz (to generate libreboot_src.tar.gz)
  • Documentation: mention that meta doesn’t create libreboot_src/ directory, but that libreboot_meta itself becomes the same.
  • Documentation: advise to rename libreboot_meta to libreboot_src after running ‘getall’.
• Annotated the ‘builddeb’ script, to say what each set of dependencies are for.
• Separated bucts/flashprog builddeb sections into separate scripts: builddeb-flashprog, builddeb-bucts.
• Documentation: Updated relevant parts based on the above.
• Added instructions to ‘build’ script for including builddeb-bucts and builddeb-flashprog in libreboot_bin
• Updated flashprog checkout (r1822 2014-06-16) from SVN (http://flashprog.org/Downloads).
  • Updated flashing instructions in docs/ for new commands needed (Macronix chip on X60/T60)
  • For X60/T60 (flashprog): Patched flashchips.c_lenovobios_macronix and flashchips.c_lenovobios_sst executables for SST/macronix (included in resources/flashprog/patch)
  • Updated builddeps to build flashprog_lenovobios_sst and flashprog_lenovobios_macronix, for X60/T60 users with Lenovo BIOS
  • moved the flashprog build instructions from ‘builddeps’ and put them in ‘builddeps-flashprog’, excecuting that from ‘builddeps’.
  • Added builddeps-flashprog to libreboot_bin.tar.gz
• flashprog: added patched flashchips.c to resources/flashprog/patch (automatically use correct macronix chip on libreboot, without using ‘-c’ switch)
  • removed ‘MX25L1605’ and ‘MX25L1605A/MX25L1606E’ entries in flashchips.c for the patched version of flashchips.c
  • added instructions to ‘builddeps-flashprog’ to automatically use this modified flashchips.c in the default build
• Added builddeb to libreboot_bin.tar.gz
• Moved ‘bucts’ build instructions from builddeps to builddeps-bucts
  • builddeps now runs ‘builddeps-bucts’ instead
  • Added ‘builddeps-bucts’ to libreboot_bin.tar.gz
  • Documentation: Added information about using ‘builddep-bucts’ to build the BUC.TS utility.
• Added ‘lenovobios_firstflash’ and ‘lenovobios_secondflash’ scripts
  • Added instructions to ‘build’ script for including those files in libreboot_bin
  • Documentation: Add tutorial for flashing while Lenovo BIOS is running (on X60/T60)
• Added ‘flash’ script (make sure to run builddeps-flashprog first) which (while libreboot is already running) can use flashprog to flash a ROM
  • eg: “sudo ./flash bin/x60/coreboot_serial_ukdvorak.rom” equivalent to “sudo ./flashprog/flashprog -p internal -w bin/x60/coreboot_uk_dvorak.rom”
  • updated ‘build’ script to include the ‘flash’ script in libreboot_bin.tar.gz
• Documentation: replaced default flashprog tutorial to recommend the ‘flash’ script instead.
• Re-add cbfstool source code back into libreboot_bin.tar.gz, as cbfstool_standalone
  • Patched that version to work (able to be built and used) without requiring the entire coreboot source code.
  • Created patched version of the relevant source files and added it into resources/cbfstool/patch
    • see coreboot/util/cbfstool/rmodule.c and then the patched version in resources/cbfstool/patch/rmodule.c
    • see coreboot/src/include/rmodule-defs.h and the rule in ‘build’ for including this in ../libreboot_bin/cbfstool_standalone
  • Added instructions to ‘build’ script for applying this patch to the cbfstool_standalone source in libreboot_bin
  • Added instructions to ‘build’ script for then re-compiling cbfstool_standalone in libreboot_bin after applying the patch
  • Added a ‘builddeps-cbfstool’ script (in src, but only used in bin and put in bin by ‘build’) that compiles cbfstool_standalone in libreboot_bin (make), moves the cbfstool and rmodtool binaries into libreboot_bin/ and then does ‘make clean’ in libreboot_bin/cbfstool_standalone
  • Updated the ‘build’ script to put ‘builddeps-cbfstool’ in libreboot_bin
  • Updated the ‘build’ script in the cbfstool (standalone) part to accomodate the above.
  • Documentation: added notes about cbfstool (standalone) in libreboot_bin
• Documentation: made docs/linux/grub_cbfs.html slightly easier to follow.
• Annotate the ‘build*’ scripts with ‘echo’ commands, to help the user understand what it actually happening during the build process.
• Documentation: added information about how ‘dmidecode’ data was put in the coreboot configs
  • Documentation: In fact, document how the ‘config’ files in resources/libreboot/config/ were created
• Documentation: Added information about which ThinkPad T60 laptops are supported, and which are not.
• Documentation: added information about LCD inverters (for upgrading the LCD panel on a T60 14.1’ XGA or 15.1’ XGA)
  • it’s FRU P/N 41W1478 (on T60 14.1") so this was added to the docs.
  • it’s P/N 42T0078 FRU 42T0079 or P/N 41W1338 (on T60 15.1") so this was added to the docs.
• Documentation: added information about names of LCD panels for T60 to the relevant parts of the documentation.
• Documentation: added information (with pictures) about the differences between T60 with Intel GPU and T60 with ATI GPU.
• Documentation: added pictures of keyboard layouts (US/UK Qwerty/Dvorak) to the ROM list, to let the user compare with their own keyboard.
• Move the coreboot build instructions in ‘builddeps’ into ‘builddeps-coreboot’ and link it in ‘builddeps’
  • Link to ‘builddeps-coreboot’ in final stage of ‘getcb’
• Move GRUB build instructions from ‘builddeps’ into ‘builddeps-grub’, link from ‘builddeps’
  • Link to ‘builddeps-grub’ in final stage of ‘getgrub’
• Move MemTest86+ build instructions from ‘builddeps’ into ‘builddeps-memtest86’, link from ‘builddeps’
  • Link to ‘builddeps-memtest86’ in final stage of ‘getmt86’
• made ‘build’ script put resources/ directory in libreboot_bin, to make builddeps-flashprog work in libreboot_bin
• Removed instructions for building source code in the ‘get’ script (they don’t really belong there)
• Added libfuse-dev and liblzma-dev to the list of GRUB dependencies in ‘builddeb’ script.
• Converted the ‘RELEASE’ file to ‘docs/RELEASE.html’
• Added those dependencies to builddeb script (for GRUB part): gawk libdevmapper-dev libtool libfreetype6-dev
• Added to build script the instruction at the end to create a sha512sum.txt with a file manifest plus checksums.
• Deleted the RELEASE and BACKPORT files (no longer needed)
• Documentation: added information about X60/T60 dock (ultrabase x6 and advanced mini dock) to relevant sections.
  • Added to docs/#serial

Markdown file for this page: https://libreboot.org/news/libreboot20140711.md

Subscribe to RSS for this site

Site map

This HTML page was generated by the Untitled Static Site Generator.