---
title: Collection of appliable Dell Optiplex & Precision Mods & Tweaks (included, but not limited to libreboot).
x-toc-enable: true
...


## Disclaimer

Any changes to the hardware or software listed here are usually tested (by atleast one user),
and reproducible **AT YOUR OWN RESPONSIBILITY**.

Some **physical modifications might be *UNREVERSIBLE*, only replacable**,
keep in mind.

In case if you need any help or get another idea to include here,
submit a patch on codeberg or get in contact on irc.


### [Reversible] Adapter-less Fan Header Mod

***!DANGER! Double/triple check if you wired it right,
as doing it wrong may DAMAGE your whole device.***

Remove the safety black frame carefully in case you would want to install it back.

----------- Dell 5 Pin layout ----------- \
________________________________________ \
-| Yellow | Red | Black | Blue | N/A | \
----------\\____________________/        

------- Standard Pin Layout ------- \
-| Black | Red | Yellow | Blue |

(3 pin fans do not have the blue wire / 4th pin)

There are 2 ways to connect 3/4 pin standard fan to the prop. 5pin header;


#### PWM-less 3 pin

*Using a fan controller hub is advised if full-speed fan operation is not desired.*

Match the pins according to the description above, then insert it, leaving 2 pins free (blue & n/a),
in case if you have a 4pin pwm fan, the side starting with the blue left unconnected.


#### PWM-aligned 4pin

*Adapters are cheap and much less of a hassle,
you have been warned.*

The wires on the connector needs to be moved by 1 (atleast),
meaning the blue/4th wire has to be the 1st wire.

It shall look like this from the standard:

------- Standard Pin Layout ------- \
-| Blue | Black | Red | Yellow |

Match and inster it, with this only 1 pin (n/a) left alone.


### [Reversible] Power On Mod for normal towers

In case any of these motherboards would be used in a different case with a 2 pin power(on) connector,
connect it to the 1 (yellow/red) & 2 (Black/black) pins. (Black to black, red to yellow)

For LEDs, 3 (-/black) & 5 (+/red) (the black frame might needs to be pull carefully to reinsert it)

-|-- Pin layout -- |- \
-|  1  |  3  |  5  |- \
-|  2  |  4  | N/A |-

A guide might be here soon with pictures.

Reference [here](https://pinoutguide.com/Motherboard/Dell_Optiplex_360_790_701_pinout.shtml)


### [Partially Reversible] Chassis Mod (MT only) for bigger PCIe Cards (GPUs, Accelerators, ...)

Fit a bigger GPU that exceeds the stock 10-inch length limit by removing the plastic 3.5" drive cage.

[Video walktrough](https://www.youtube.com/watch?v=b_M2GGunaYM). (just found, not my)

A guide might be here soon with pictures.


[//]: # "SPDX-License-Identifier: GFDL-1.3-or-later"
